In the market for a new air conditioning unit? You need to education yourself regarding the respective choices available to you. There is always a trade-off among lower buy cost and long-term value and efficiency.
At the same time, even if cash is no object in your case, it is not unfeigned that larger is better when it comes to AC units. You need to invest in a unit that is tailored to the needs of your living space.
If you are in the market for new home air conditioning unit, here is a buyer’s checklist:
1. Weight short vs. long-term costs: High-efficiency units cost more at first, but you will save cash down the road in terms of lower energy costs. How much you will save depends upon the unit you buy and how often times you use your air conditioner.
2. Make sure your unit is at least a 13 SEER: Every air conditioner has a seasonal energy efficacy rating (SEER). You are required by law to buy a 13 SEER or better. Anything amongst 14.5 and 17 is considered mid-range efficiency. Above 17 is high-efficiency.
3. Even a low-efficiency unit is better than any old A/C unit: Air conditioning units are light-years in front of where they were 20 years ago. Even buying the least-expensive, lowest-efficiency new units available today could cut your energy costs in half.
4. If your house has no AC ducts, consider a split AC system: A split system means that the blowers and evaporators are inside your home, while the compressor is outside. A split system costs more, but it is for less to install in galore cases. Also, the system allows you to adjust temperature levels for dissimilar rooms in the house.
5. Get a portable unit if you are renting or have a little home: This is a outstanding choice when the owner has prohibited you from installing a system.
6. It is crucial to get the right size unit for your home: Many persons think more spectacular is always better, but this is not the case. Your unit needs to keep the area cool, but at the same time it needs to dehumidify the air. If you install a unit that is too big, it will shut itself off before it has the chance to dehumidify the air. Select an AC unit size based upon the BTUs. For example, a 1,000-square-foot area requires in regards to a 19,500 BTU unit. Consult a BTU chart to figure out the AC unit BTU requisite required for your home.
7. Choose among inverter and fixed-speed motor: Inverter-based home air conditioning units grant for variable motor speed, meaning they are more energy-efficient. They also occur to us DC controls, so they have quieter motors. However, fixed-speed schemes are less costly to buy.
8. Select either R407c or R410a system: R22 was the established coolant type for most AC systems, but it is being phased out due to global agreements and respective domestic laws. Instead, buy a scheme that uses either R407c or R410a coolant. Either is fine, though R410a units are the most effective of the two types.
Follow these steps to find the right AC unit for your home. Bring this guide with you when you shop for a unit. Or, refer to the guide as instructional material when speaking with an HVAC representative on the phone.
For more selective information on buying a home air conditioning unit in the Dallas-Fort Worth area, visit: http://www.tomsmechanical.com/residential/residentialservice.php.
- Amana Air Conditioner
- American Standard Air Conditioner
- Bryant Air Conditioner
- Carrier Air Conditioner
- Central Air Conditioners
- Comfortmaker Air Conditioner
- Gibson Air Conditioner
- Goodman Air Conditioner
- Heil Air Conditioner
- Janitrol Air Conditioner
- Lennox Air Conditioner
- Payne Air Conditioner
- Rheem Air Conditioner
- Ruud Air Conditioner
- Tempstar Air Conditioner
- Trane Air Conditioner
- Weatherking Air Conditioner
- York Air Conditioner